equip.recycle.net -- Tire Industry Equipment (Used) Exchange Listings

Quantity	Units	Frequency
1	each	once
Price	Funds	Per Unit
37,500	US Dollar	each

Tire Industry Equipment - Portable Eagle Truck Tire Derimmer- T-02418. The Eagle Truck Tire Derimmer can handle removing the rim out of truck tires, and bigger tires as well. This portable unit is powered by a 23 hp Isuzu diesel engine. The cycle time is about 20 second. It’s got a 2 inch standard ball hitch for easy moving of the unit. The owner is currently using it periodically, so it’s in good running condition. The derimmer was designed to allow the tire to be rolled into the unit, not lifted, minimizing any back issues and worker’s compensation claims.

Quantity	Units	Frequency
1	each	once
Price	Funds	Per Unit
37,500	US Dollar	each

Tire Industry Equipment - Portable Eagle Truck Tire Derimmer- T-02418. The Eagle Truck Tire Derimmer can handle removing the rim out of truck tires, and bigger tires as well. This portable unit is powered by a 23 hp Isuzu diesel engine. The cycle time is about 20 second. It’s got a 2 inch standard ball hitch for easy moving of the unit. The owner is currently using it periodically, so it’s in good running condition. The derimmer was designed to allow the tire to be rolled into the unit, not lifted, minimizing any back issues and worker’s compensation claims.

Quantity	Units	Frequency
1	each	once
Price	Funds	Per Unit
225,000	US Dollar	each

Tire Industry Equipment - Columbus McKinnon Shredder- T-02409. Columbus McKinnon is a leader in the tire shredding/recycling industry. Their knife and rotor set up are designed to produce a very clean chip. This package of Columbus McKinnon equipment is a rare find in the used equipment marketplace. The package includes a full CM 2 speed system, including a screen for producing a 2 inch nominal tire chip and the conveyors needed to make this a turn key system. In addition, the package includes another CM 2 speed with a broken shaft, to repair or use for parts.

Quantity	Units	Frequency
1	each	once
Price	Funds	Per Unit
195,000	US Dollar	each

Tire Industry Equipment - SSI 2000E Shredder- T-02415. This SSI shredder is a great, moderately sized tire shredder, capable of handling car and light pick up truck tires. Currently the knives are double stacked, allowing the machine to easily handle semi truck tires, also. This 2000E is very similar to the very popular SSI 2400, except the shafts on the 2000E are a bit shorter, creating a very robust shredder, and tremendously minimizing the instance of a shaft failure. The owner is installing new knives, and will check over the bearings and replace the endplate seals at that time. The rails and fingers are in great condition, and the control panel is in excellent condition. This shredder is powered by a 200 hp electric motor, and the electric control panel is in excellent condition. The shredder has a very nice catwalk all the way around the machine making it easy to access the shredder. In addition to new knives installed, the owner will steam clean and paint the shredder and catwalk. It will look and run like a new machines. It comes with infeed and outfeed hoppers. This shredder includes a spare full set of knives that need to be rebuilt.

Quantity	Units	Frequency
1	each	once
Price	Funds	Per Unit
155,000	US Dollar	each

Tire Industry Equipment - Columbus McKinnon Tire Shredder System, T02409. Columbus McKinnon is a leader in the tire shredding/recycling industry. Their knife and rotor set up are designed to produce a very clean chip. This package of Columbus McKinnon equipment is a rare find in the used equipment marketplace. The package includes a full CM 2 speed system, including a screen for producing a 2 inch nominal tire chip and the conveyors needed to make this a turn key system. In addition, the package includes another CM 2 speed with a broken shaft, to repair or use for parts.

Quantity	Units	Frequency
1	each	once
Price	Funds	Per Unit
495,000	US Dollar	each

Tire Industry Equipment - Granutech/ Saturn Model 80 Grizzly System- T-01243. The Granutech/Saturn Model 80 Grizzly is the premier machine for taking 2 inch chips down to a 1 inch minus TDF. The heavy rotor and 300 hp gives this machine the power it needs to process 2 inch chips to a 1 inch minus granule at a rate of 3-4 ton per hour This system has everything you need to put this after a 2 inch chip system, including an infeed conveyor, the Grizzly, a vibratory discharge conveyor, outfeed conveyor, crossbelt magnet and an aspiration system. We are installing new bed and fly knives on the machine, and new wear liners and new screens. The control panel will be completely rebuilt with a 500 Amp disconnect, a soft start and all the controls. This is a very high production machine and it is the best machine on the market today used to remove up to 80-85% of the steel from your tires while reducing the 2” x 2” size tire chips down to 1 inch or less in size. These machines are the work horse of today’s tire processing industry and are built much more robust than most of their competition. You won’t find a nicer used machine on the market today!

Quantity	Units	Frequency
1	each	once
Price	Funds	Per Unit
335,000	US Dollar	each

Tire Industry Equipment - SSI M100E Shredder system- T-02355. SSI is a highly respected name in the shredder industry. This 2007 M100E is powered by a 200 hp electric motor. The shredder is a primary system, including an infeed and outfeed conveyor, and electric controls. The shredder was just rebuilt, including new knives, bearings and seals. In addition, the outfeed conveyor had work done on it, and the infeed is in excellent condition. This system is ready to go to work. The knives in the machine are 2 inch and they have a lot of life left in them. In addition, there is a spare set of shafts and a spare set of knives that need to be rebuilt that go with this system.

Quantity	Units	Frequency
1	each	once
Price	Funds	Per Unit
165,000	US Dollar	each

Tire Industry Equipment - Columbus McKinnon Tire Chipper- T02382. Columbus McKinnon is a leader in the scrap tire processing industry, and this CM Chipper is no exception. This dual drive chipper was in line behind a CM Primary shredder, producing about 14 ton per hour of 2 inch chips when the knives were new. When the knives had some wear the production dropped to about 8 ton per hour. This shredder comes with the infeed hopper, electric control panel with PLC touch screen, including soft start, and the motor.

Quantity	Units	Frequency
1	each	once
Price	Funds	Per Unit
call for pricing	US Dollar	each

Tire Industry Equipment - MacSaturn 72x46 Shredder- T-01230. MacSaturn has been a leader in the tire shredding industry for years. This 72x46 is a good sized shredder, able to handle a variety of materials from tires, some purgings, light metals, oversize material like furniture. It is hydraulically powered by a 300 hp hydraulic power unit. We are taking this machine into our shop to look it over and replace or rebuild components as needed. We have the endplate back from the machine shop and the machine is back together. We will paint the shredder the color of your choice, the conveyors are safety yellow. The machine has double stacked 2 inch knives for a 4 inch one pass cut. We are setting this shredder up as a primary, one pass shredder system. The system comes with a brand new infeed and brand new outfeed conveyor, as well as a shredder stand, hydraulic power pack, and control panel.

Quantity	Units	Frequency
1	each	once
Price	Funds	Per Unit
195,000	US Dollar	each

Tire Industry Equipment - MacSaturn 72x50 Shredder system- T-02364. MacSaturn is a leader in the waste reduction industry. This is one of their larger shredders, the opening is 72 inches by 50 inches, and is powered by 2 Detroit 671 Diesel Engings. The large hopper opening allows for a 5 ft tire to be run through the shredder. The knives are currently stacked with a 4 inch cut, and there is a spare set of knives that will go with the system.

Quantity	Units	Frequency
1	each	once
Price	Funds	Per Unit
227,500	US Dollar	each

Tire Industry Equipment - Columbus McKinnon Tire Chipper Shredder- T0183B. This CM Chipper is a great machine for taking preshredded tires and taking them down to a manageable material. We have completely refurbished this machine, including installing new hardened rotors. The rotors are made out of a heat treated 4140 material, rather than the mild steel they are usually built with. We have done this so that when a knife comes off while the machine is in operation and you don’t catch it immediately you shouldn’t harm your knife seats near as easily. In addition these will have the multi-stack cutters meaning that they will have 1.9, 1.8, as well as 1.7 knife seats available to put knives on. Because there are so many 2.0 machines in the field, there is a plentiful supply of used 2 inch blades that can be bought for a fraction of the cost of a new blade. They can be ground down to be used on the 1.9 seat, then on the 1.8, and finally on the 1.7 seat. This way you can use a knife 3 times, greatly reducing your maintenance costs. This machine will be powered by a 250 H.P. electric motor and have a soft start in order to reduce the amperage draw on startup. This chipper would work ideally in conjunction with any other primary shredder that you currently have installed. This shredder will have in-feed hopper, stand, and out-feed hopper. An infeed and outfeed conveyor is available for an additional charge.

Quantity	Units	Frequency
1	each	once
Price	Funds	Per Unit
59,500	US Dollar	each

Tire Industry Equipment - Portable Eagle Tire Baler and Double Hopper- T-01202. Eagle International has a reputation for making top quality equipment for the tire recycling industry. The Eagle Tire Baler was designed to: eliminate collection of waste water, reduce fire hazard, and to provide beneficial usage of waste tires in baled form. These baled tires have been used as fences and even walls for buildings or houses. Baling tires also allows you to retrieve a product, if mono-filled for future uses. This machine will bale approximately 100 passenger size tires into a 30” x 54” x 60” cube, held together with 5 wire ties. This baler is capable of baling four bales per hour or thirty two bales in an 8 hour shift therefore it will equate to processing 3200 scrap waste tires per day. This baler looks to be in very good condition and has been previously owned by a city. So it has been maintained very well and besides having the paint a little faded from sitting out in the hot Southwest dessert sun the machine looks to be in excellent shape. The machine we have for sale is a gooseneck style hitch and the tires all look to be in very good condition. This unit is completely portable and is powered by an Isuzu diesel engine. The machine will be checked over by our shop and be ready to work once it reached your location. In addition to this Eagle Tire Baler we are also selling and Eagle Tire Double Hopper to go along with this unit to help with getting your tires hauled to the baler without having to keep moving the baler around all the time. This Eagle Tire hopper is powered off two of the hydraulic control valves that are mounted on the Eagle Baler. So this is just a value added benefit that goes along with the purchase of this Tire Baler. This is an excellent opportunity for you to purchase a very nice lightly used package of equipment at a very reasonable price.

Quantity	Units	Frequency
1	each	once
Price	Funds	Per Unit
179,000	US Dollar	each

Tire Industry Equipment - Morbark 1300A Tub Grinder- CA permitted- W-021237. This 13-foot portable tub grinder is powered by a rebuilt 1,000 HP CAT Diesel engine. Unit has a grapple loader & tilt tub. This will work great for processing stumps, trees, pallets, C&D, green waste, and much more at a rate up to about 320 yards per hour depending on the material being processed. The grinder is in great operating condition, call today for more details! California permitted & ready to go right to work!

Quantity	Units	Frequency
1	pair	once
Price	Funds	Per Unit
call	US Dollar	pair

Tire Industry Equipment - Columbus McKinnon Tire Shredder System including a 2 speed Shredder and Chipper- T-01190. This used Columbus McKinnon Tire shredding system was owned by a state agency so this equipment was subject to a very good preventative maintenance program and should be ready to be put to work at your location. See below the complete list of equipment that makes up this tire shredding package. Equipment List: 1. Whole Tire in-feed conveyor 36” wide X 30’ long- this is a factory built Columbus McKinnon conveyor. 2. Columbus McKinnon Primary (2) speed shredder with 250 H.P. electric motor with 2.2 knives installed. 3. Short Shredder out-feed conveyor 24” wide X 10’ long- this is a factory built Columbus McKinnon conveyor 4. Long Shredder out-feed conveyor 24” wide X 30’ long- this is a factory built Columbus McKinnon conveyor 5. Columbus McKinnon Chipper shredder with 200 H.P. electric motor with 1.8 knives installed 6. Short Chipper out-feed conveyor 30” wide X 10’ long- this is a factory built Columbus McKinnon conveyor 7. Long Chipper out-feed conveyor 30” wide X 30’ long- this is a factory built Columbus McKinnon conveyor 8. Columbus McKinnon Super classifier (2) deck disc screen classifier (note daisy wheels are worn pretty bad and will need some attention in the not too distant future). 9. Return Conveyor 30” wide X 30’ long- this is a factory built Columbus McKinnon conveyor 10. Sized Material out-feed conveyor 30” wide X 30’ long- this is a factory built Columbus McKinnon conveyor 11. Cross-belt self-cleaning magnet and magnet stand All the knife seats look good on both the primary shredder and the chipper. This should make someone a very good whole tire down to 2” TDF processing system. We have many pictures as well as a video of all the equipment as it was set-up where we purchased it.

Quantity	Units	Frequency
1	each	once
Price	Funds	Per Unit
39,500	US Dollar	each

Tire Industry Equipment - Eagle Tuf Cut tire cutter- T-01158. The Eagle Tuf Cut adds flexibility to your tire processing operation by allowing you to accept and process tires up to 23.5/25 12 ply into your system. This portable diesel unit is powered by a 23 hp Isuzu diesel engine, and it runs very smooth. It comes standard with a hydraulic tire lift and rollers to be able to manage the bigger tires. You can cut about 60 truck tires or 120 to 150 passenger tires an hour. This machine has new blade installed and has been painted.

Quantity	Units	Frequency
1	each	once
Price	Funds	Per Unit
160,000	US Dollar	each

Tire Industry Equipment - Refurbished Cumberland 3250 Granulator- T-01122. Cumberland equipment has a long history of success in the recycling industry. We recently completed rebuilding this machine from top to bottom. The machine has had every bolt hole repaired not with just Heli-coils but we have drilled each of these holes out oversize and used 4140 inserts to make a more permanent repair. All wear surfaces have been rebuilt using Stoody hard-facing build up wire for long lasting ability to these high wear areas. New bearings were installed on the refurbished rotor along with new fly knives. All the bed knives surfaces were repaired and new bed knives installed. This machine was used previously to take 2 inch tire chips down to a ¾ inch chip at a rate of about 2 tons per hour. It is powered by a 250 hp electric motor, and the rotor will be completely rebuilt. Machine comes with in-feed and out-feed hoppers and is ready to be put into operation. This machine would work well in the rubber industry or would have very high capacities in the plastic recycling industries. The unit has water jackets around the cutting chamber as well as through the center of the rotor. This machine will come with a new set of screens, size of your choice.

Quantity	Units	Frequency
1	eacch	once
Price	Funds	Per Unit
29,500	US Dollar	each

Tire Industry Equipment - Eagle Tuf Cut Tire Cutter: T-02290. The Eagle Tuf Cut adds flexibility to your tire processing operation by allowing you to accept and process tires up to 23.5/25 12 ply into your system. This diesel portable cutter is powered by a 23 hp Isuzu diesel, and it’s ready to go to work. It comes with a spare blade.

Quantity	Units	Frequency
1	each	once
Price	Funds	Per Unit
50,000	US Dollar	each

Tire Industry Equipment - SSI 1500H Tire Shredder- T-02262. This SSI shredder is a hydraulic machine with 2 100 hp electric motors. It has an opening of 52 inches by 32 inches. The 2 inch knives will produce a primary shred out of car and passenger tires. This machine has just had a bearing replaced so it’s running real smooth. It is a clean machine that comes complete with the infeed and outfeed conveyors, stand, hopper, hydraulic power pak, and electric motor and controls. This shredder is ready to go to work and can be demonstrated on request.

Quantity	Units	Frequency
2	each	once
Price	Funds	Per Unit
95,000	US Dollars	each

Tire Industry Equipment - 48” Entoleter/ AlSteel Granulator: T0198 & or T0199. These machines have been completely refurbished and are presently better than new because we have beefed up many of the areas where we had noticed that wear was occurring. These areas were all welded back up to standard and then these areas have all been hard-faced with Stoody build up wire to slow down the wear in these areas in the future. The rotors on these machines were also hard-faced to cut down on the wear areas and we have also installed larger diameter bolt holes that hold all the fly knives in place. We had each knife holder on the rotors planed and squared up to make sure that all the fly knifes were held in place properly. We also had both of the rotors sent off and professionally balanced to make sure they operate with as little vibration as possible. We put new bearings on the shafts when we installed the rotors back in the machine. Also both of the bed knife holders were sent in and completely refurbished by a professional machine shop where they drilled out and inserted each of the existing bolt holes with new fine thread bolt holes. Also each of these bed knife holders were welded up and planed off to make sure that all the bed knives were mounted properly. All brand new knives were installed back in these machines both bed & fly knives. When you purchase these machines you will get a complete set of re-sharpened used knives with the machines as well. In addition we have several other spare wear parts that will go with these machines. These machines also have hydraulic folding hoppers and screen holders for easy access for making knife changes and screen changes. They also have water cooled jackets around the cutting chambers to allow them to operate cooler. These machines are powered by 250 H.P. electric motors and we will furnish with them brand new soft starts. These machines would work ideally for the processing of 1”-3/4” rubber chips down to 3/8”- ¼” rubber particles. We would estimate that these machines would each process around 3500-4,000 lbs per hour of this size material. This is an excellent matched pair of machines that are both ready to go to work. We don’t think you’ll find any better used “high production” machines in the country.

Quantity	Units	Frequency
one	each	once
Price	Funds	Per Unit
50,000	US Dollars	each

Tire Industry Equipment - Tire Wire Baler: T01101. We just finished checking this machine over in our shop and made several improvements to enhance the operation of the unit. We test ran the machine and produced several bales and after getting it properly adjusted we were able to make a very consistent size and weight bale. Note: the bales we were producing were 10” X 10” X 13” in size and weighed 30 lbs. Of course this will vary with the amount of rubber you have in your wire as well as the size wire you are trying to bale. This machine works and performs the same job as the Wendt tire wire balers that sell for over $200,000. Of course it’s not as automated but in the end you can produce a bale that is very comparable to the ones produced by the Wendt baler. Although it may be a little more labor intensive to operate, this machine offers a tremendous savings over purchasing a new machine to make the same or very similar sized bale. This machine is powered by a 25 H.P. electric motor that drives the hydraulic pumps and everything is then operated hydraulically through electrical pressure valves and relays. This unit comes complete with all the electrical controls needed to operate.