equip.recycle.net

Used Waste and Recycling Equipment Category

Vecoplan
Add a Listing       View Listings

Back to Used Equipment

GRADES INCLUDED

  • Used Balers

  • Used Shears

  • Used Shredders, Granulators & Hammermills

  • Used Tub Grinders

  • Used Truck Scales

  • Used Floor Scales

  • Other Weighing Equipment

  • Used Magnetic Separation Equipment

  • Used Lift Magnets

  • Used Screening & Sizing Equipment

  • Used RollOff Containers

  • Used Load Lugger Containers

  • Used Front End Loader Containers

  • Used Caddie Cart Containers

  • Used Containers (Other)

  • Used RollOff Trucks

  • Used Load Lugger Trucks

  • Used Front End Loader Trucks

  • Used Rear & Side Loader Trucks

  • Used Curbside Collection Vehicles

  • Other Waste/Recycling Vehicles

  • Other Used Waste & Recycling Equipment






  • ADD A LISTING TO THE EXCHANGE


    Used Waste and Recycling Equipment

    Select the material / item to buy or sell :


    Choose Wanted OR Available :


    Country:

    Email:




    To receive these types of leads by email with the full contact information included in the email,
    subscribe to our value added service

    AVAILABLE : Used Balers - LA1240121
    Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
    #1951 Allegheny Closed Door Baler. #1951 Allegheny Closed Door Baler • Closed Door • 20 HP Motor • 20" x 20" Opening Size • 6" Cylinder • Bale Size: 60" 30" x 40" • Bale Weights: 800-1200 lbs. • Ram Thrust: 57,848 lbs. • 5 Tie.
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    9,200.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Balers - LA1240120
    Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
    #1974 C&M Horizontal Closed-Door Baler with Gaylord Cart Dumper. #1974 C&M Horizontal Closed-Door Baler with Gaylord Cart Dumper • 30 HP Closed Door with Cart Tipper • 7” Hydraulic Cylinder • 30” x 50” Feed Opening • 36” x 30” x 72” Baler Size • Hydraulic Cart Dumper Integrated into Baler • Mfg: 1997
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    13,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Waste & Recycling Equipment - LA1240044
    Shipping Pt. / Location: USA, TN
    2008 Fuchs MHL 320 Scrap Handler. Scrap Handler, Wheeled, Genset, Grapple, Long reach, Cab Riser.
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    94,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    WANTED : Used Shredders, Granulators & Hammermills - LW1240043
    Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
    SSI Shredder Model: Q85ED or Equivalent . IN SEARCH OF: SSI Shredder Model:Q85ED or Equivalent Ratings: VAC 480, Phase 3, Hz 60, Power 150 hp Estimated Installation Dimensions: Length: 20’ Width: 3’ Height: 5’ • Voltage: 460/3/60 • Shock Load Protection • Cutter Thickness: 1.5 in • Cutter Diameter: 1.8 in • Cutter Material: 4140 HT • Shaft Diameter: 6 in • Cutting Chamber (WxL): 54 x 52 in • Machine length: 166 in • Machine Width: 86 in • Machine Height: 133 in • Machine Weight: 29,500 lbs. • Hopper opening: 81 x 79 in • Hopper height: 45 in • Stand height: 48 In
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    -
    -
    -
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Waste & Recycling Equipment - LA1240041
    Shipping Pt. / Location: USA,
    Cat M325 Scrap Handler/ Wheeled. Scrap Handler, Long reach, Wheeled, Genset for Magnet.
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    25,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    WANTED : Used Shears - LW1240040
    Shipping Pt. / Location: USA,
    Wanted to Buy to Buy Shears. Wanted Alligator Shears & Excavator Shears.
    Quantity
    Units
    Frequency
    4
    each
    Ongoing
    Price
    Funds
    Per Unit
    -
    -
    -
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    WANTED : Used Balers - LW1240039
    Shipping Pt. / Location: USA,
    Wanted to Buy Car Crushers. Wanted to buy Car Crushers, Portable or Stationary.
    Quantity
    Units
    Frequency
    3
    each
    Ongoing
    Price
    Funds
    Per Unit
    -
    -
    -
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    WANTED : Used Balers - LW1240010
    Shipping Pt. / Location: USA,
    Two Ram Baler. Two Ram baler, 200 HP, Separation Door, With Conveyor or not.
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    -
    -
    -
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Balers - LA1239885
    Shipping Pt. / Location: USA, HAZELWOOD MISSOURI
    Logemann 245AT1 Two-Ram Baler. Logemann 245AT1 2-ram baler. Complete with 50 HP 480 volt 3 phase motor, 9” bore main cylinder and 7” bore ejector cylinder. Produces high density 40” x 29” x 60” bales weighing up to 1,200 lbs. Charge box opening of 74” x 64”.
    Quantity
    Units
    Frequency
    1
    each
    One Time Only
    Price
    Funds
    Per Unit
    50,000
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Balers - LA1239884
    Shipping Pt. / Location: USA, HAZELWOOD MISSOURI
    Logemann 345M Two-Ram Baler. Logemann 345M two-ram baler. Complete with two (2) 75 HP 460 volt 3 phase motors and 14” main bore cylinder. Produces high density bales that measure 60” x 36” x 42” bales weighing up to 1,500 lbs OCC. Charge-box opening of 116” x 60”. Complete with shear blade, Omron Processor, US/L&P Wire Tier model 331 and modified for export bales.
    Quantity
    Units
    Frequency
    1
    each
    One Time Only
    Price
    Funds
    Per Unit
    50,000
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Shredders, Granulators & Hammermills - LA1239840
    Shipping Pt. / Location: USA, SUWANEE GEORGIA
    double cyclinders Guillotine. 150MT cutting power. easy for cutting wood, plastic etc
    Quantity
    Units
    Frequency
    1
    each
    One Time Only
    Price
    Funds
    Per Unit
    5000
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Balers - LA1239839
    Shipping Pt. / Location: USA, TUCKER GEORGIA
    baler. 200 MT pressure and vertical baler.very good for all kinds of metal and plastic bottle.
    Quantity
    Units
    Frequency
    1
    each
    One Time Only
    Price
    Funds
    Per Unit
    5000
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Waste & Recycling Equipment - LA1239823
    Shipping Pt. / Location: USA, NASHVILLE TN
    Cat 318 Scrap Handler/ Wheeled. Cat 318, Wheeled, Long reach, Cab Riser,
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    29,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Shredders, Granulators & Hammermills - LA1239817
    Shipping Pt. / Location: USA, RAVENEL SC
    MAC SATURN SHREDDER/GRANULATOR. MAC SATURN 200 HP HYDROSTAR MOTOR, STARTER, CONVEYER, DISCONNECT PANELS INCLUDED. AS well as Mitts and Merril Granulator, Macdonald Knife Hogg, and starter panell Dust collectors, and magnets. Equipment is has been stored indoors and have not been used in some time. Call if Interested
    Quantity
    Units
    Frequency
    1
    each
    One Time Only
    Price
    Funds
    Per Unit
    48500
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Balers - LA1239812
    Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
    #1939 Selco Harris V5-HD . USED SELCO V5-HD VERTICAL BALER Factory Tested Standard Features: • Motor: 10 HP, 230/460v • Bale Size: 60” L x 30” W x 48” H • Bale Weight: 900 - 1100 Lbs. • Cycle Time, No Load: 50 Seconds • Hydraulic Pressure (Max): 1800 PSI • Platen Force (Max): 50,900 Lbs. • Main Cylinder Bore: 6” • Stroke of Cylinder: 48” • Feed Opening: 60” x 27” • Hydraulic Pump Capacity: 12 GPM • Oil Reservoir Capacity: 18 Gallon • Weight: 4,300 lbs.
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    3,800.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Balers - LA1239811
    Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
    #1914 Harmony M72 Vertical Baler. Harmony M72 Vertical Baler Mfg: Harmony Model: M72MD S/N: 72129MD 72” Vertical Baler 5HP Low Profile Dealer said: Works fine, No leaks
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    5500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Balers - LA1239788
    Shipping Pt. / Location: USA, SAINT LOUIS MO
    Harris (Mosley) Badger 75S-2-10/7 Two-Ram Baler. Harris/Mosley Badger 75S-2-10/7 Two-Ram Baler. Complete with a 75 HP 230/460 volt 3 phase motor, 10” bore main cylinder and 7” bore eject cylinder generating 137 tons of force. Infeed opening of 43" wide x 62" long. Producing high density 31” x 46” x 61” bales that weigh up to 1,425 lbs. OCC. Featuring US Wire Tier model 341, programmable controls, Combo-door, 5' long bale table, soft start, conveyor controls in baler panel up to 10 HP, upper and lower photo eyes, non-ferrous liners on main frame floor and ram, motor starters, disconnect switch, pushbutton operators and oil cooler & heater
    Quantity
    Units
    Frequency
    1
    each
    One Time Only
    Price
    Funds
    Per Unit
    65,000
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Balers - LA1239262
    Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
    #1979 Used 1996 Sierra Shear Baler. #1979 Used 1996 Sierra Shear Baler Model: 500 t Electric Motor: 3 Phase, 90 kW, 125 HP, 160 AMP, 480 Volts Rexroth HYD. Pump: 62 GPM Denison Speed Pump: 38 GPM Oil Tank Capacity: 583 gal. Machine Wright: 62 t
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    95,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Balers - LA1239261
    Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
    #1893 Colmar SB6200-800 Shear baler Diesel. #1893 Colmar SB6200-800 Shear baler Diesel Working Hours: Approx. 11 Parts Warranty: 6 Months Type: 4-stroke diesel, direct injection, turbo-charged and after-cooled Max Power: 173 HP (129 kW) at 2,200 rpm Overall length: 49’ 5” Length of container: 20’ 4” Overall width of roll on/roll off machine: 18’ 5” Overall height: 12’ 7” Weight of machine fully equipped: 125,700 lbs
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    290,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Waste & Recycling Equipment - LA1239142
    Shipping Pt. / Location: USA, ARIZONA
    Cat 318 Scrap Handler/ Wheeled. Scrap Handler, with Grapple, Cab Riser, Long Reach, Genset.
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    43,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Balers - LA1239141
    Shipping Pt. / Location: USA, ARIZONA
    Aljon 400 Portable Logger Baler. Portable Baler Logger for White Goods, Tin and Metals. With Crane.
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    46,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Waste & Recycling Equipment - LA1239118
    Shipping Pt. / Location: USA, RICHFIELD SPRINGS NEW YORK
    GP-2HD Glass Pulverizer. Stand-Alone Glass Pulverizer to be integrated into your current glass recycling system or we can manufacture one to fit your needs. Processes up to 20tph.
    Quantity
    Units
    Frequency
    #1
    each
    Ongoing
    Price
    Funds
    Per Unit
    58,000
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Lift Magnets - LA1239025
    Shipping Pt. / Location: USA, TEXAS
    Onan 10 KW Genset/ Hydraulic. Genset for Scrap Magnet, Onan 10KW, Ohio Controller, Runs on Hydraulics. Will run up to 48" Magnet.
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    6800.00
    -
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    WANTED : Used Shredders, Granulators & Hammermills - LW1238988
    Shipping Pt. / Location: CANADA, MISSISSAUGA CHOOSE...
    Grinder Or Shredder. Grinder or Shredder, capacity 3000-4000 Lbs / hour. Capable to also shred/grind film and fiber
    Quantity
    Units
    Frequency
    1
    each
    One Time Only
    Price
    Funds
    Per Unit
    -
    -
    -
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Balers - LA1238971
    Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
    #1952 Marathon WS 150 Auto Tie Baler w/ Above Ground Slider Bed Conveyor. #1952 One 2016 Marathon WS 150 Auto Tie Baler w/ Above Ground Slider Bed Conveyor, Feed Opening: 40” x 60”, 8” Cylinder, 30 HP; 460 Volt Power Unit, Oil Cooler, Bilingual Color Touchscreen Operator Interface, Ethernet Remote Diagnostics, 48” wide Slider Bed Above Ground Conveyor
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    90,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Balers - LA1238964
    Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
    #1784 Compac Specialties Hydraulic Horizontal Cardboard Baler. Compac Specialties Hydraulic Horizontal Cardboard Baler
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    45,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Shredders, Granulators & Hammermills - LA1238870
    Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
    #1982 Ball and Jewell Granulator. #1982 Ball and Jewell Granulator 20HP
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    9000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Shredders, Granulators & Hammermills - LA1238867
    Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
    #1986 Vecoplan RG 52/100 HP Single Shaft Shredder. #1986 Vecoplan RG 52/100 HP Single Shaft Shredder 100 HP 52" x 58" Opening 37 Cutters 2 Speed Hydraulic Ram 15" Diameter Rotor 2" Screen
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    52,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    WANTED : Used Magnetic Separation Equipment - LW1238858
    Shipping Pt. / Location: USA, BRYAN OHIO
    48inch wide conveyor belt w/ cross belt magnet . Looking for a 48" wide conveyor belt and cross belt magnet to feed shredder.
    Quantity
    Units
    Frequency
    1
    each
    One Time Only
    Price
    Funds
    Per Unit
    -
    -
    -
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Floor Scales - LA1238758
    Shipping Pt. / Location: USA, DOVER OHIO
    Industrial Pallet Size Scale - Digital Platform Floor Scale - (45" x 36"). Good Condition - Fully Operational. Digital Industrial Platform Floor Scale with 45" x 36" pallet-size platform. Very High Capacity. Rice Lake. We can ship this anywhere in the continental U.S. via truck - send your zip code for a freight quote. Mast can be removed for shipping. FREIGHT OR PICKUP IS THE RESPONSIBILITY OF THE BUYER.
    Quantity
    Units
    Frequency
    1
    each
    One Time Only
    Price
    Funds
    Per Unit
    600
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Balers - LA1238620
    Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
    #1957 Rebuilt Harmony 7230 Vertical Baler. Rebuilt Specs • Fully Rebuilt • Rebuilt Cylinder • New Hoses • Structural Steel Checked • All Electrical Components Checked • Reservoirs Cleaned • 6 Month Parts & Labor Warranty
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    9000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Shredders, Granulators & Hammermills - LA1238611
    Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
    #1867 Dual Shaft Shredder. Dual shaft shredder model: Reduction Technologies 4026 equipped with 100 hp motor 31-1/2" knives infeed hopper and stand, cabinet and controls. Excellent for tires, rubber, plastics, E-Waste, light metals, wood products, paper and cardboard. Completely rebuilt in 2013 and only run 4 months afterwards.
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    70,875.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    WANTED : Used Waste & Recycling Equipment - LW1238589
    Shipping Pt. / Location: USA, NEW YORK NEW YORK
    Used Waste & Recycling Equipment. Used and new waste liquid and solid equipment
    Quantity
    Units
    Frequency
    10
    each
    Year
    Price
    Funds
    Per Unit
    -
    -
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Waste & Recycling Equipment - LA1238540
    Shipping Pt. / Location: USA, HENDERSONVILLE NC
    30' Slider Bed Conveyor #1978. #1978 30' Slider Bed Conveyor Rubber Slider Conveyor 30' Long / 48" Wide 1" Cleats every 4' 2 HP motor
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    4,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Shredders, Granulators & Hammermills - LA1238430
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    SSI 3600ED Dual Shaft Shredder Rebuilt 2010. SSI Dual Shaft Shredder Mdl. SSI 3600 ED – New 1986 – Fully Rebuilt 2010 Two 75 HP Motors (150 HP) Cutter Diameter 26″ Chamber Opening: 48.5″ wide x 81″ Long
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    79,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Shredders, Granulators & Hammermills - LA1238429
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Vecoplan Single Shaft Shredder Model RG62/125 SPK - NEW 2002. Vecoplan RG62/125 SPK Single Shaft Shredder – New 2002 Feed Opening 62″ 125 HP Motor Diameter of Rotor 14.5″ x 63″ long 74 Cutters – 1.57″ x 1.57″
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    69,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Waste & Recycling Equipment - LA1238375
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Chi Chang Foam Scrap Extrusion Line 130mm & 160mm - New 2017. Chi Chang Machinery Foam Sheet Extrusion Line – New 2017 Line Consists of Two Extruders: 130 mm and 160 mm Water Cooled Fasi Gravimetric Blending System – New 2017 – Model FGB-2 – 4 Component Blending System with 2 Loading Receivers and 2 Self Contained Loaders HiTech Automatic Screen Changer – New 2017 – Model Eo7RXL – Continuous Screen Type – Complete with Closed Loop “Cycle Time” Control. Features of the Closed Loop – Time algorithm: Operational modes: OFF/AUTO/TEST/MELT – Password protected – Screen advancement based on constant increments according to a Tine Based Logic Cycle. The Closed Loop-Time algorithm is used to maintain a steady incremental rate of screen travel. The rate of screen movement are operator selectable and adjustable. Screen movement is verified by the controls. Immediate indication of any malfunction in screen movement is given by means of the NO FEED alarm. The automatic cycling is stopped, and the operational mode is turned off. Variety of heating patterns for the heater (s) can be selected to customize the controls for a variety of polymer and processing conditions. All the heating zones are monitored by temperature controllers. Power consumption indicators are also included. Door handle is interlocked with a disconnect switch inside the enclosure. Alarms (visual and audible) supplied for: NO FEED: screen movement cycle is not completed. NO COOL: accidental loss of cooling water to the line. NO HEAT: alarm stops operation of the controls and returns to OFF mode. prevents tracking issues by not allowing the screen to advance without adequate heating conditions. Protection supplied for: TEST: mode has max time protection. BOOSTER and EXILT LIP heater (s) have separate protection limits against overheating in all modes. Incorrect settings of the timers. MELT mode has an additional protection against overheating of BOOSTER and EXIT LIP that allows the cooling system to expedite the drop of temperature (mainly for low flash point polymers). Incorrect mode selection when properly interlocked with the extruder. Air Cooling Ring and Forming Mandrels Gas and C02 Metering Equipment & Pumps – Hammelmann Hi Pressure Gas Pump – Normal Operating Pressure – 2,200 lbs. – 480 volts 3 phase – 60 Hz. Hammelmann Hi C02 Pump – 480 VOLTS 3 Ph 60 Hz. Chi Chang Take-off System Chi Chang 2 Station Winding Unit. AC 480 Volts 3 Phase – 60 Hz. – Total Capacity 950 lbs/hour )( 430 Kg/hr.) – 160,000 lbs. per week. 638,400 Lbs./Month
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    264,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Waste & Recycling Equipment - LA1238373
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    SUIS 100 mm Recycling Line - New 2001. SIUS Model BN 100 AW 100 mm Recycling Line – 2001 Model BN 100 AW 100 mm – water cooled extruder with Vent (open) 50 HP/AC Motor Belt Driven Gear Box Complete Control Panel with AMP Meters and Heat/Cool zones and Heat Only Zones Slide Plaste Type Screen Changer with Power Pac With Rectanguler Feed Throat water cooled and Hopper with Sweeper Arm Water Ring Pelletizer and Water Cooling Slide Control Panel for Complete Line
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    28,900.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Waste & Recycling Equipment - LA1238370
    Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
    Holin Twin Extuders Recycling Line - New 2012. Holin Twin Extruder Recycling Line (Foam Scrap) 150 mm & 120 mm – 2013 Holin Twin Extruder Recycling Line Consisting of: 2 Extruders: 150 mm & 120 mm for recycling foam scrap 104 HP each or 77 Kw each Crammer Feeder 2 Slide Plate Screen Changers – 8″ & 10″ with Power Packs 8″ 25 Hole Strand Die 8 foot water bath with water re-circulation pump Air Knife 32 Knife Helical Rotor
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    32,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Balers - LA1238169
    Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
    #1884 EZ Crusher Logger Baler. 2006 EZ Crusher 115 HP john deere engine Cab and crane
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    64,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Shredders, Granulators & Hammermills - LA1238168
    Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
    #1950 Hempstead Dual Shaft Shredder. Hempstead Model H300-54-50-E Dual Shaft Shredder Has Two 25 HP motors 54" opening Comes with Hydraulic Box Dumper Comes with In Feed Conveyor and Discharge Con
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    37,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Balers - LA1238165
    Shipping Pt. / Location: USA, HENDERSONVILLE NORTH CAROLINA
    #1920 Marathon Nexgen Horizontal Baler. #1920 Used Marathon Nexgen Horizontal Baler Model 3560 Full Eject closed door style baler 20 HP Motor Two 6" Bore Cylinders 58" x 35" Feed Opening 60" x 30" x 48" Bale Size Applications: Shredded Paper Cardboard Magazines Newspaper Paper Bags Plastic Bags Plastic Bottles Aluminum Cans Steel Cans
    Quantity
    Units
    Frequency
    1
    each
    Day
    Price
    Funds
    Per Unit
    37,500.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    WANTED : Used Shredders, Granulators & Hammermills - LW1238067
    Shipping Pt. / Location: USA, FT. WAYNE INDIANA
    30 hp to 40 hp grinder. looking for 30 hp to 40 hp range grinder …
    Quantity
    Units
    Frequency
    1
    -
    One Time Only
    Price
    Funds
    Per Unit
    -
    -
    -
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Waste & Recycling Equipment - LA1237910
    Shipping Pt. / Location: INDIA, MUMBAI MAHARASHTRA
    Zinc Refinery for demolition . We have zinc refinery for sale, the refinery has 137,000MT HMS, 13,000 mt copper, 15,ooo mt Alu. 1700 different kind of working machinery. actual value of refinery 120 million, sellin at 42 million, we require genuine buyers.
    Quantity
    Units
    Frequency
    137000
    each
    One Time Only
    Price
    Funds
    Per Unit
    50000
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    WANTED : Used Waste & Recycling Equipment - LW1237824
    Shipping Pt. / Location: USA, FRESNO CALIFORNIA
    Buffer, granulator ,screen shaker, compression mold. Compression molding,screen shaker, tire buffer, granular
    Quantity
    Units
    Frequency
    1
    each
    -
    Price
    Funds
    Per Unit
    -
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Lift Magnets - LA1237740
    Shipping Pt. / Location: USA, ARIZONA
    Bateman 9 KW Genset/ Diesel. Diesel Genset, will handle up to 45" Scrap Magnet. DC
    Quantity
    Units
    Frequency
    1
    each
    Ongoing
    Price
    Funds
    Per Unit
    5,900.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    To receive these types of leads with the full contact information included in the email,
    subscribe to our value added service

    Add a Listing       View Listings

    Back to Used Equipment

    Cooksmill NetSystems
    - File No: